Case studies / Hillsboro

Mold on the Blower Housing of a 16-Duct System in Hillsboro

Hillsboro, MO
HouseProperty
3,339Square feet
16Ducts cleaned

The Frahn home in Hillsboro, MO is a 3,339-square-foot house with 16 ducts. Anne did not find SafeAir through an advertisement. Her subdivision referred the company. The job was booked as a standard cleaning, and what the inspection found inside the air handler turned out to be the larger part of it.

Project Overview

City: Hillsboro
Type of Property: House
Customer Name:

Frahn

Service: Duct Mold Treatment, Standard Clean

Work Completed

Total Square Feet: 3339
Total Vents Cleaned: 16

Before and After Photos

The Challenge / Problem

Inspection recorded the usual dirt and dust through the runs, and mold. The mold was not in the ductwork. It was inside the air handler itself, spread in dark and yellow-green patches across the upper face of the blower housing, heavy enough in places to cover the manufacturer's model plate.

The Solution / Approach

SafeAir cleaned all 16 ducts and carried out mold remediation in the same visit. Remediation on a blower housing is separate work from clearing a run, because the growth sits on the component the system blows through rather than on the sheet metal around it. Duct mold removal is a service SafeAir runs throughout Hillsboro.

Results / Outcome

The second photograph is the same cabinet from the same angle: same breaker panel, same wiring, same marking on the rail. The housing is back to plain off-white with no growth on it, and the model plate that the mold had covered reads clearly again.